THE INDUSTRY LEADERS
McNeilus FLEX Controls
- Complete mixer monitoring on one convenient screen
- More intuitive serviceability and diagnostics with troubleshooting features, ability to harness information and more
- Control at your fingertips with both a 7-inch touchscreen, feature keys and in-cab keypads
Vision Systems
- Multiple systems to fit various price ranges
- Complete visibility into truck and driver behavior
- High-definition monitors
- Built-in DVR (SSV7 Extreme & SSV360)
- Support for up to four cameras
Operator Assurance
- All the features you need to improve operational peace of mind
- Upper ladder gate closes automatically after passing through
- Our new and improved ladder design features new step tread and full-length grab handles
- Step bumper provides easy access for chute washout with three points of contact
- Hydraulic chute assist gives a controlled foldover and keeps the operator clear
Hopper
- Multiple hopper options to fit your needs
- SAT hopper has a hydraulic-powered "swing-away throat" to keep top of hopper at same height
- Flip-up hopper offers a convenient way to move hopper and allow for maximum efficiency during discharge
- Options for abrasion-resistant liners to extend the life of your hopper and aid in washout
Paint/Decals
- Drum and components steel shot blasted
- Primed with high solids epoxy primer
- Standard finish is Sikken's Autocoat Topcoat, a high-performance and high solids polyurethane
CNG System
- Customizable configurations to achieve maximum performance
- Dedicated pressure relief device (PRDs) system spans the full length of each cylinder and provides continuous heat protection
- Exclusive design streamlines system with 25% reduction in plumbing components and 50% fewer fitting connections
- Supported by comprehensive inspection and maintenance services
Axles
- Custom axle configurations create the best legal payload for any area in North America
- Pusher and tag axles can be added to meet weight restriction laws for any area
- Seven-axle configuration is part of the newest Bridgemaster® designs to maximize payload
Fenders
- Improved durability over previous design
- Stainless steel hardware
- Improved corrosion resistance with galvanized steel skins and weathering steel supports
- Available in steel and aluminum
Mixer Base Weight
- Lightweight options are available for many mixer components, lowering mixer base weight and increasing payload
- Water tanks are available in steel, aluminum and poly; steel and poly split tanks for chemical add mix are also available
- Oil reservoirs available in steel and poly
- Chutes available in steel and aluminum, with lined chutes for easier washout
- Drum is fully customizable and configurable, with multiple steel thicknesses on drum skin, fins and reinforcements
Chutes
- Five-foot main steel chute allows for smooth discharge and control; 6-foot and 6.5-foot main chutes also available
- Easy-to-maneuver chute swings smoothly into pour positions
- Chutes available in steel, aluminum and lined options for easier washout
- Multitude of possibilities for chute storage configuration
- Chute washout recovery systems are available
Chute Lock
- New design has fully enclosed top and back sides of rear pedestal to keep components clean
- All moving components covered and protected against the elements
- Fewer moving parts than previous chute lock designs
Bridgemaster® Axle
- Patented Bridgemaster® load-distribution tag axle is federal-bridge-compliant and allows higher legal payloads
- Among the most durable and cost-effective solutions for federal compliance
- Engineered steering and handling angles specifically for concrete mixer applications
Standard and M80 Series
- Constructed of 3/16 in. AR200 abrasion-resistant steel
-
Legendary formed fins for unmatched performance
- One-of-a-kind fin row welded after assembly
- Manufacturing process using automated drum line ensures consistency and quality; robotic-controlled rollers create the truest drum in the industry
- M80 offers an 11.5-yard drum in less space than a traditional 11-yard drum
- Increased water level volume and mixing bowl area when compared to others in the industry
McNeilus Washout System
- Patent Pending System
- Virtually eliminates the need to access the top of the mixer for cleaning, increasing operator assurance
- Saves time and inconsistencies in cleaning
- Cleans the hopper, collector, main chute and both sides of the rear fins
- Provides a more thorough clean further into the drum than other systems on the market
- Optimized water pressure and nozzle placement to clean but not cause runoff
McNeilus FLEX Controls
- Complete mixer monitoring on one convenient screen
- More intuitive serviceability and diagnostics with troubleshooting features, ability to harness information and more
- Control at your fingertips with both a 7-inch touchscreen, feature keys and in-cab keypads
Standard and M80 Series Drum
- Constructed of 3/16-inch AR200 abrasion-resistant steel
-
Legendary formed fins for unmatched performance
- One-of-a-kind fin row welded after assembly
- Manufacturing process using automated drum line ensures consistency and quality; robotic-controlled rollers create the truest drum in the industry
- M80 offers an 11.5-yard drum in less space than a traditional 11-yard drum
- Increased water level volume and mixing bowl area when compared to others in the industry
Head Impeller
- Enhances mixing performance for all mix designs
- When placed in the correct location, effectively discourages buildup and increases uniform mixing, unlike other industry designs
- Placement doesn't have large hydraulic draw or pressure surging, and is available lined or unlined
Vision Systems
- Multiple systems to fit various price ranges
- Complete visibility into truck and driver behavior
- High-definition monitors
- Built-in DVR (SSV7 Extreme & SSV360)
- Support for up to four cameras
Operator Assurance
- All the features you need to improve operational peace of mind
- Upper ladder gate closes automatically after passing through
- Our new and improved ladder design features new step tread and full-length grab handles
- Step bumper provides easy access for chute washout with three points of contact
- Hydraulic chute assist gives a controlled foldover and keeps the operator clear
Hopper
- Multiple hopper options to fit your needs
- SAT hopper has a hydraulic-powered "swing-away throat" to keep top of hopper at same height
- Flip-up hopper offers a convenient way to move hopper and allow for maximum efficiency during discharge
- Options for abrasion-resistant liners to extend the life of your hopper and aid in washout
Paint/Decals
- Drum and components steel shot blasted
- Primed with high solids epoxy primer
- Standard finish is Sikken's Autocoat Topcoat, a high-performance and high solids polyurethane
CNG System
- Customizable configurations to achieve maximum performance
- Dedicated pressure relief device (PRDs) system spans the full length of each cylinder and provides continuous heat protection
- Exclusive design streamlines system with 25% reduction in plumbing components and 50% fewer fitting connections
- Supported by comprehensive inspection and maintenance services
Axles
- Custom axle configurations create the best legal payload for any area in North America
- Pusher and tag axles can be added to meet weight restriction laws for any area
Fenders
- Improved durability over previous designs
- Stainless steel hardware
- Improved corrosion resistance with galvanized steel skins and weathering steel supports
- Available in steel and aluminum
Mixer Base Weight
- Lightweight options are available for many mixer components, lowering mixer base weight and increasing payload
- Water tanks are available in steel, aluminum and poly; steel and poly split tanks for chemical add mix are also available
- Oil reservoirs available in steel and poly
- Chutes available in steel and aluminum, with lined chutes for easier washout
- Drum is fully customizable and configurable, with multiple steel thicknesses on drum skin, fins and reinforcements
Chutes
- Five-foot main steel chute allows for smooth discharge and control; 6-foot and 6.5-foot main chutes also available
- Easy-to-maneuver chute swings smoothly into pour positions
- Chutes available in steel, aluminum and lined options for easier washout
- Multitude of possibilities for chute storage configuration
- Chute washout recovery systems are available
Chute Lock
- New design has fully enclosed top and back sides of rear pedestal to keep components clean
- All moving components covered and protected against the elements
- Fewer moving parts than previous chute lock designs
McNeilus Washout System
- Patent Pending System
- Virtually eliminates the need to access the top of the mixer for cleaning, increasing operator assurance
- Saves time and inconsistencies in cleaning
- Cleans the hopper, collector, main chute and both sides of the rear fins
- Provides a more thorough clean further into the drum than other systems on the market
- Optimized water pressure and nozzle placement to clean but not cause runoff
Operator Assurance
- All the features you need to improve operational peace of mind
- Safety grab handles and steps
- Upper ladder gate closes automatically after passing through
- Hydraulic chute assist gives a controlled foldover and keeps the operator clear
- Back-up camera
- Lighting packages to increase visibility of you, your job site and surroundings
Paint
- Superior E-Coat corrosion protection on frame rails and various piece parts
- Parts painted prior to assembly for a clean, thorough finish
- Optional clear coat finish available for protection against abrasive cleaners
CNG System
- Customizable configurations to achieve maximum performance
- Dedicated pressure relief device (PRDs) system spans the full length of each cylinder and provides continuous heat protection
- Exclusive design streamlines system with 25% reduction in plumbing components and 50% fewer fitting connections
- Supported by comprehensive inspection and maintenance services
Standard Oshkosh Aluminum Transfercase
- Increase payload capacity - 170 lbs savings over iron
- Improved job site performance - decreased creep speeds and increased tractive effort
- Increased low range strength by 27% over iron
Extended Life Coolant
- PEAK extended life coolant standard on S-Series® front discharge mixers
- Extended testing intervals - requires only annual testing
Axles
- Custom axle configurations create the best legal payload options for any area in North America
- Patented hydraulically operated Load-Span Tag Axle provides consistent load control and superior off-road maneuverability
Hopper
- Full walk-around hopper for improved safety and accessibility
- Maximized performance - 40-inch collector with 26-inch throat
- Optional flip-up hopper allows for maximum efficiency during discharge
Drum
- Industry-leading, low-slump discharging drum
- 11-cubic-yard capacity
- Built with abrasion-resistant 1/4-inch AR200 steel and a spun steel head for optimal payload hauling
Engine
-
Three available engine offerings:
- Cummins ISX12
- Cummins ISX-G (CNG)
- Detroit DD13
Cab
- Ergonomically designed cab and dash
- Addition of USB charge plug
- Optimized harness routing for improved durability and serviceability
Controls
-
Mechanical
- Internal mixer controls
- Dash-mounted mechanical lever to control drum speed and charge/discharge
- Cable chute control joystick with drum start/stop button
- External mixer controls
- Lever in bumper to control chutes
-
Eaton Electronic Proportional and Eaton Remote Electronic
- Internal mixer controls
- Cable chute control joystick with buttons to control drum speed and charge/discharge
- External mixer controls
- Lever in bumper to control chutes
Chute
- Manual and power chute options
- Chutes available in steel, aluminum and lined options for ease in washout
- Chute extension up to 21 ft. 9 in.
McNeilus FLEX Controls
Vision Systems
Operator Assurance
Hopper
Paint/Decals
CNG System
Axles
Fenders
Mixer Base Weight
Chutes
Chute Lock
Bridgemaster® Axle
Standard and M80 Series
McNeilus Washout System
McNeilus FLEX Controls
Standard and M80 Series Drum
Head Impeller
Vision Systems
Operator Assurance
Hopper
Paint/Decals
CNG System
Axles
Fenders
Mixer Base Weight
Chutes
Chute Lock
McNeilus Washout System
WORKS AS HARD AS YOU DO
Every day, on every job site, they rise to the challenge. They put in the work, standing up to some of the toughest conditions on Earth. Whatever it is, McNeilus helps you get the job done. See why McNeilus mixers are leaders in the industry and on the job site - no matter the challenge.
Visibility into
your entire fleet
The future of your fleet is connected. Through advanced telematics, McNeilus delivers real-time data from the job site for informed decision-making and fleet optimization. That means instant insight to an individual vehicle's location, delivery status and performance.
The brains of the operation
McNeilus FLEX Controls are the new nerve center for the demands of your job today and upgrades seamlessly for the demands of tomorrow. Our flexible system lets you add or take away functionality to meet your needs:
- Complete mixer monitoring on one convenient screen
- More intuitive serviceability and diagnostics with troubleshooting features, ability to harness information, and more
- Control at your fingertips with both a 7-inch touchscreen, feature keys and in-cab keypads
STATE-OF-THE-ART
ON WHEELS
The McNeilus M80 Series Drum delivers enhanced productivity features to exceed industry standards. Featuring a one-of-a-kind fin row welded after assembly, 100 percent solid seam welds and a 11.5-yard volume in less space than traditional 11-yard drums. Using an automated drum line – which produces 140 cone panels per shift – McNeilus provides the consistently superior manufacturing you expect from a worldwide leader in mixer innovation.
Our new lightweight drum option, introduced at CONEXPO, is 900 pounds lighter, with the same mixing and pouring performance as our standard 3/16-inch drum. It is constructed with an AR450 abrasion-resistant steel shell and the drum interior is configured for optimal balance of thickness and longevity. It is available in the patented M80 Series and standard M77 drums with both standard 42-inch and paver 46-inch openings.
WHERE EFFICENCY AND
FLEXIBILITY INTERSECT:
CNG Systems
McNeilus Truck and Manufacturing has been an innovative solution provider, helping fleets optimize performance for over 40 years. Our CNG fuel systems are available in multiple configurations to meet all your fleet's needs and fulfill your community's desire for environmentally friendly alternatives. And McNeilus supports you with comprehensive inspection and maintenance services to maintain the integrity of your CNG system.
START THE CONVERSATION
Have a question or want to learn more about a McNeilus solution? Contact the best service and support in the industry.
Or visit our full site at mcneiluscompanies.com
Get more information.
To learn how McNeilus can meet your mixer vehicle needs, fill out this form.
We're Ready to Help
We have branch locations across the United States and Canada to help you with parts, questions and advice.
