Atlantic Series Front Loader®

  • miller-atlantic-series-fl
  • aes-vile-atlantic-fl
  • atlandic1
  • atlanditc2
  • florida-express-atlantic-fl
  • IMG_9676

Rugged. Reliable. Resilient. When you want a front loader that will get you the most for your money, you want the McNeilus Atlantic Series Front Loader.® Productive and heavy duty, it’s built to take on your toughest routes.

The Atlantic also exhibits McNeilus’ standard for superior technology with CAN-based controls that offer convenience for the operator and maintenance personnel, alike. The system features sealed keypads, backlit screens, vehicle status lights and unmatched diagnostics capability, all while providing reliable performance backed by our experience in CAN-based systems.

With other features such as McNeilus’ Excalibre™ cylinders that help prevent hydraulic contamination, AR450 abrasion resistant steel and arms rated to lift up to 10,000 pounds, this truck doesn’t quit!

Specifications

PERFORMANCE SPECIFICATIONS*
 Arms Down IDLE: 11 seconds

1350 RPM: 6 seconds

 Arms Up IDLE: 10 seconds

1350 RPM: 6 seconds

 Forks Down IDLE: 4 seconds

1350 RPM: 3 seconds

 Forks Up IDLE: 3 seconds

1350 RPM: 3 seconds

 Packer Extended IDLE: N/A

1350 RPM: 20 seconds

 Packer Retract IDLE: N/A

1350 RPM: 9 seconds

 Seal Height 50"
 Compaction Force = 118,800
 Ejector Extend IDLE: 28 seconds

1350 RPM: N/A

 Ejector Retract IDLE: 10 seconds

1350 RPM: N/A

 Top Door Open IDLE: 8 seconds

1350 RPM: 7 seconds

  Top door Close IDLE: 7 seconds1350 RPM: 6 seconds
  Tailgate Open IDLE: 28 seconds1350 RPM: N/A
  Taligate Close IDLE: 31 seconds1350 RPM: N/A
  * Cycle times may vary slightly
ARM ASSEMBLY
 Arm Side Plate 1/4" grade 80
 Arm Construction  Internal reinforcement
FORKS
 Fork Construction A36, 1.5" x 60"
HOPPER SPECIFICATIONS
 Hopper Capacity 12 cubic yards
 Hopper Floor 1/4" AR400
 Upper Hopper Sides 3/16" AR200
 Lower Hopper Sides 3/16" AR400
 Hopper Width 84"
PACKER/EJECTOR SPECIFICATIONS
 Lower Face Plate 5/16" AR200
 Upper Face Plate 3/16" AR200
 Packing Panel Floor Tracks 3/8" grade 50 high-strength steel
 Top and Side Wear Strips 1/4" AR400
 Bottom Wear Strips 1/4" X-wear
BODY SPECIFICATIONS
 Body Floor 3/16" AR200
 Body Roof 10-gauge AR200
 Body Side Walls 1/8" AR450
TAILGATE SPECIFICATIONS
 Tailgate Rear and Side Walls  1/8" AR450
 Eight-Point Automatic Locking  Tailgate
OPERATIONS
 Command ZoneTM multiplex and distributed CAN-based controls offering the best technology in the business - sealed keypads, backlit screens, operator status lights and diagnostic display.
 Air or Rabbit Ear Joysticks
HYDRAULICS
 Pump Vane or Gear with Pack-on-the-go flow control system
 Control Valves Parker VA35, MRV setting- 2500 psi
 Oil Reservoir Capacity 50 gallons
 Return Filter 5 micron
 Suction Strainer 100 mesh stainless steel with magnets
CYLINDERS
 Ejector Cylinder (36-40 yd) 6-1/4" 3-stage 164"(43-45 yd) 6-1/4" 3-stage 181"
 Arm Cylinder 4-1/2" bore x 2-1/2" rod x 46" stroke
 Fork Cylinder 3-1/2" bore x 2" rod x 26" stroke
 Tailgate Cylinder 3-1/4" bore x 2" rod x 38" stroke
PAINTING
 Packer and components steel shot blasted prior to priming with high solids epoxy primer.
 Finish coat Akzo Coating's Sikkens high solids acrylic urethane.
MCNEILUS WARRANTIES
 Contact your McNeilus representative on specific warranty details. Or for more information, call 888-686-7278.